MAX3223EEUP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3223 |
| Pin Count | 20 |
| Power Supplies | 3.3/5V |
| Interface | RS-232 |
| Number of I/O | 8 |
| Nominal Supply Current | 1mA |
| Propagation Delay | 150 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Height | 950μm |
| Length | 6.6mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3223EEUP+ Overview
LED drivers with the enhanced 20-TSSOP (0.173, 4.40mm Width) package will be able to drive a variety of common LEDs with ease.In this package, the receiver is mounted in the Tube format.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.A Surface Mount-type PCB or development board can be used to place this wide receiver.Power supply requirements for this differential driver are 3V~5.5V.There can be up to 2/2 eligible receivers/drivers on the field at the same time with this electronic part.IC receiver is designed for applications with a temperature of -40°C~85°C.With a supply voltage range of 3.3V, this line driver ic operates efficiently.Integrated into this wide receiver are 20 terminations that are used for driving and receiving signals from data.It is packaged with 20 pinouts that are market standard for this particular transceiver.For more variants of this part, try searching with the base part number MAX3223, which indicates the product type, temperature, package, etc.A 20-pin driver IC with enhanced power dissipation control is featured here.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.It is typical for this receiver to have a resolution of 2 bits when it is specified.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 3.3/5V-pin power supply.Transceivers implemented by this IC total 1 in total.This electronic part can have?up to 2 eligible drivers on the field at once.?There are 8 serial I/Os on board this IC, and it has a standard VGA interface.
MAX3223EEUP+ Features
Tube package
20 pin count
20 pins
3.3/5V power supply
MAX3223EEUP+ Applications
There are a lot of Maxim Integrated MAX3223EEUP+ Drivers/Receivers/Transceivers applications.
- Notebook
- Wireless HD Photography
- interconnection between switches
- Fast Ethernet
- Wireless transmission
- Datacom networking applications
- Gigabit Ethernet
- VoIP phones
- Satellite communications networks
- Bar, KTV wireless entertainment
