MAX3223EIDB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 5V SUPPLY |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX3223 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Nominal Supply Current | 1mA |
| Max Supply Current | 1mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 500kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 3.3V |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3223EIDB Overview
An excellent driver IC for common LEDs thanks to its enhanced 20-SSOP (0.209, 5.30mm Width) package.The receiver is packaged in a Tube package.As a Transceiver can transceiver, this part has enabled many applications to be served.This wide receiver can be placed on any Surface Mount-type PCB or development board.In terms of power supply, this differential driver utilizes 3V~5.5V.As many as 2/2 eligible receivers/drivers can be used simultaneously with this electronic part.IC receiver is designed for applications with a temperature of -40°C~85°C.Driver ICs in this category can operate efficiently with a supply voltage range of 3.3V.There are 20 terminations in this wide receiver so that signals can be driven from the data and received.There are 20 pinouts available on this transceiver which are market standard.For more variants of this part, try searching with the base part number MAX3223, which indicates the product type, temperature, package, etc.A 20-pin driver IC with enhanced power dissipation control is featured here.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.There is typically a resolution of 2 bits specified with this receiver.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.It implements 1 transceivers in total.Embedded 2 drivers are included on the integrator circuit.ICs with ALSO OPERATES AT 5V SUPPLY functions also improve the overall stability and accuracy of signal management.A malfunction could occur when the input current exceeds 1mA.
MAX3223EIDB Features
Tube package
20 pin count
20 pins
MAX3223EIDB Applications
There are a lot of Texas Instruments MAX3223EIDB Drivers/Receivers/Transceivers applications.
- Laser diode bonding
- Military satellite communications
- Automation systems
- Car radio
- Car alarm systems
- Satellite communications networks
- Mainframes, workstations or storage devices
- Structural bonding
- Wireless access points
- Bar, KTV wireless entertainment
