MAX3318ECPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 2.25V~3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX3318 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Number of I/O | 8 |
| Nominal Supply Current | 2mA |
| Propagation Delay | 175 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 460Kbps |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 2.5V |
| Output Low Current-Max | 0.0005A |
| Out Swing-Min | 7.4 V |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3318ECPW Overview
Driver ICs with enhanced 20-TSSOP (0.173, 4.40mm Width) packages are excellent for driving LEDs with common characteristics.Tube package is used for this receiver.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.Power supply for this differential driver is 2.25V~3V.During operation, this electronic part may have up to 2/2 eligible receivers/drivers.In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.Wide receiver can operate within the range of 2.5V supply voltages efficiently.In this wide receiver, 20 terminations are integrated for driving and receiving signals from data.In this package, you will find 20 market-standard pinouts for this transceiver.MAX3318 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.It is a 20-pin driver IC with enhanced power dissipation controls.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.In most cases, the receiver will be specified with a 2-bit resolution.This transceiver module is designed to operate from an input voltage supply of 2.5V.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.In total, there are 1 transceivers implemented by this module isolated transceiver.The integrator circuit is embedded with 2 drivers.There are 8 serial I/Os on board this IC, and it has a standard VGA interface.
MAX3318ECPW Features
Tube package
20 pin count
20 pins
MAX3318ECPW Applications
There are a lot of Texas Instruments MAX3318ECPW Drivers/Receivers/Transceivers applications.
- Portable radio
- Wired telephone
- Wireless HD Photography
- 1x/2x Fiber Channel
- Thermal management
- Clock radio
- Wireless access points
- Telecom applications
- Automation systems
- Aircraft navigation
