MAX3362EKA#TG16
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3.14V~3.47V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX3362 |
| Operating Supply Voltage | 3.3V |
| Interface | RS-422, RS-485 |
| Operating Supply Current | 3mA |
| Nominal Supply Current | 1.7mA |
| Data Rate | 20Mbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 50 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 50 ns |
| Max Junction Temperature (Tj) | 150°C |
| Height | 1.45mm |
| Length | 3mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX3362EKA#TG16 Overview
LED drivers with the enhanced SOT-23-8 package will be able to drive a variety of common LEDs with ease.Tape & Reel (TR) package is used to mount this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.In terms of power supply, this differential driver utilizes 3.14V~3.47V.At any one time, this electronic part can have up to 1/1 eligible receivers/drivers.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~125°C.This line driver ic can operate efficiently with a supply voltage range of 3.3V.8 terminations are integrated into this wide receiver for driving and receiving signals from data.With the part number MAX3362 identifying the product type, temperature, package, etc., you can search with it to see more variants.A 8-pin driver IC with enhanced power dissipation control is featured here.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.There is a capability of 1-bit resolution with this ic receiver.This receiver is typically specified with a resolution of 1 bits. There is a 3.3V input voltage supply that can be used to operate this transceiver module.There is a subcategory called Line Driver or Receivers for this rf transceiver module.The module isolated transceiver implements a total of 1 transceivers.With an input voltage of 3mA, this integrating circuit has the ability to drive LEDs with an output voltage of 3mA.
MAX3362EKA#TG16 Features
Tape & Reel (TR) package
8 pins
MAX3362EKA#TG16 Applications
There are a lot of Maxim Integrated MAX3362EKA#TG16 Drivers/Receivers/Transceivers applications.
- Wireless communication
- Portable radio
- Military satellite communications
- Cable network front end
- Single to Multimode Fiber Conversion
- Single fiber bidirectional application
- Copper connection network
- Fiber optic cable connection network
- Desktop radio
- Interconnection between switches and computers
