MAX3485CSA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX3485 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3V |
| Supply Current-Max | 2.2mA |
| Data Rate | 10Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 50mV |
| Receive Delay-Max | 90 ns |
| Transmit Delay-Max | 35 ns |
| Output Low Current-Max | 0.0025A |
| Out Swing-Min | 1.5 V |
| High Level Input Current-Max | 0.000002A |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MAX3485CSA+ Overview
Driver ICs with enhanced 8-SOIC (0.154, 3.90mm Width) packages are excellent for driving LEDs with common characteristics.In the Tube package, this receiver is mounted.As a Transceiver can transceiver, this part has enabled many applications to be served.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.This differential driver uses 3V~3.6V for power supply.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.The operating temperature of this ic receiver is 0°C~70°C. It is primarily designed for applications with low temperatures.Wide receiver can operate within the range of 3.3V supply voltages efficiently.In this wide receiver, 8 terminations are integrated for driving and receiving signals from data.The transceiver is packaged with 8 market standard pinouts so that it can be easily used.Since the base part number MAX3485 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.An enhanced power dissipation driver IC with 8 pins.It is important to note that this ic receiver had a maximum resolution of 1 bits.It is typical for this receiver to have a resolution of 1 bits when it is specified.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.There is one driver IC that is designed to operate from a 3.3V power supply, and only one driver IC in total.To power the ic receiver, sufficient current but not more than 2.2mA should be supplied to its VCC pin.
MAX3485CSA+ Features
Tube package
8 pin count
8 pins
3.3V power supply
MAX3485CSA+ Applications
There are a lot of Maxim Integrated MAX3485CSA+ Drivers/Receivers/Transceivers applications.
- Automation systems
- Home theater wiring-free
- IP cameras
- Tuner
- Bridges
- Fast Ethernet
- Wireless 3D game
- Fiber distributed data interface (FDDI)
- Low power, low voltage systems
- Wireless access points
