MAX3485ESA+

8 Terminations3.3V 8 Pin MAX3485 Receivers1 Bits 1/1 Drivers/Receivers1 Functions

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX3485ESA+
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 596
Description: 8 Terminations3.3V 8 Pin MAX3485 Receivers1 Bits 1/1 Drivers/Receivers1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	540.001716mg
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	1995
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Transceiver
Subcategory	Line Driver or Receivers
Max Power Dissipation	471mW
Technology	CMOS
Voltage - Supply	3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Base Part Number	MAX3485
Pin Count	8
Output Voltage	3V
Operating Supply Voltage	3.3V
Interface	RS-422, RS-485
Operating Supply Current	1.1mA
Nominal Supply Current	1.1mA
Output Current	20μA
Propagation Delay	65 ns
Data Rate	10Mbps
Output Characteristics	3-STATE
Differential Output	YES
Output Polarity	COMPLEMENTARY
Protocol	RS422, RS485
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	1/1
Driver Number of Bits	1
Receiver Number of Bits	1
Duplex	Half
Receiver Hysteresis	50mV
Number of Transceivers	1
ESD Protection	No
Receive Delay-Max	90 ns
Simplex/Duplex	Half Duplex
Transmit Delay-Max	35 ns
Output Low Current-Max	0.0025A
Max Junction Temperature (Tj)	160°C
Out Swing-Min	2 V
High Level Input Current-Max	0.000002A
Height	1.75mm
Length	5mm
Width	4mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX3485ESA+ Overview

LED drivers benefit from this IC's enhanced 8-SOIC (0.154, 3.90mm Width) package.In the Tube package, this receiver is mounted.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.The wide receiver can be mounted on any Surface Mount-type PCB or development board.It takes 3V~3.6V from the power supply to run this differential driver.There can be up to 1/1 eligible receivers/drivers on the field at the same time with this electronic part.In most applications, this ic receiver is used in environments where -40°C~85°C is the operating temperature.With a supply voltage range of 3.3V, this line driver ic operates efficiently.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.In this package, you will find 8 market-standard pinouts for this transceiver.Since the base part number MAX3485 describes the product type, temperature, package, etc., you might get more options by searching with it.It is a 8-pin driver IC with enhanced power dissipation controls.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.Using this ic receiver, you were able to achieve a resolution of 1 bits.There are typically 1 bits of resolution specified in the specifications of this receiver.There is a supply voltage of 3.3V on the input of this transceiver module, so it can be operated from that source.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.It implements 1 transceivers in total.Input voltage is set to a value of 1.1mA, and this integrating circuit is capable of driving LEDs with that voltage.The device is capable of delivering voltage at 3V.In this bluetooth transceiver, a 20μA output current is provided as an output.