MAX4091AUK+T
| Parameters | |
|---|---|
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 571mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 6V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4091 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 130μA |
| Nominal Supply Current | 185μA |
| Slew Rate | 0.2V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 71 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~6V ±1.35V~3V |
| Input Offset Voltage (Vos) | 30μV |
| Bandwidth | 500 kHz |
| Unity Gain BW-Nom | 500 kHz |
| Voltage Gain | 115dB |
| Average Bias Current-Max (IIB) | 0.2μA |
| Supply Voltage Limit-Max | 7V |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
MAX4091AUK+T Overview
In order to protect the op amps, a SC-74A, SOT-753 case is used. An op amp of this type is a General Purpose-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 5. There are a total of 5 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 6V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 5 pins are available on the instrumentation amplifier. Regarding input offset voltage, op amp rates 30μV. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Using a supply current of 130μA , this buffer op amp will be able to operate. Keeping the voltage gain at 115dB is the best course of action. There are a total of 1 channels available on the op amps. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 3V voltage. In this case, Beyond-the-Rails? represents the instrumentation amplifiers' series number.
MAX4091AUK+T Features
5 Pins
supply voltage of 6V
115dB voltage gain
Output Type: Rail-to-Rail
MAX4091AUK+T Applications
There are a lot of Maxim Integrated MAX4091AUK+T Instrumentational OP Amps applications.
- Subtraction operation circuits
- Signal transformation
- Wireless base stations
- Gaming industry
- pH (acidity)
- Vehicle electronics
- Weighing systems
- Oscilloscopes
- Automotive sensors
- Band-stop filter
