MAX4289ESA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4289 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 2.75V |
| Number of Circuits | 1 |
| Operating Supply Current | 18μA |
| Nominal Supply Current | 9μA |
| Output Current | 19mA |
| Slew Rate | 0.006V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 57 dB |
| Current - Input Bias | 5nA |
| Voltage - Supply, Single/Dual (±) | 1V~5.5V |
| Output Current per Channel | 19mA |
| Input Offset Voltage (Vos) | 200μV |
| Gain Bandwidth Product | 17kHz |
| Unity Gain BW-Nom | 17 kHz |
| Voltage Gain | 110dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Power | NO |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4289ESA Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. Buffer amps of this type are called General Purpose-types. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. It consists of a total of 8 pins in total. Please take in mind that op amp should be run at 3V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The op amp ic has an array of 8 pins on it. In terms of input offset voltage, operational amplifier rates 200μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using a supply current of 18μA , this buffer op amp will be able to operate. Voltage gain should remain at 110dB. This op amp ic has 1 circuits. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of instrumentation amplifier is rated 2.75V voltage.
MAX4289ESA Features
8 Pins
supply voltage of 3V
110dB voltage gain
Output Type: Rail-to-Rail
MAX4289ESA Applications
There are a lot of Maxim Integrated MAX4289ESA Instrumentational OP Amps applications.
- Blood pressure sensors
- Automotive sensors
- Digital cameras
- Automatic control
- Industrial applications including automation
- Portable electronic products powered by batteries
- Cinema or auditorium audio system
- Large motor controllers
- Radar
- Gaming industry
