MAX4412EXK+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4412 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Current - Supply | 1.7mA |
| Slew Rate | 140V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 94 dB |
| Current - Input Bias | 1.6μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Bandwidth | 500MHz |
| Average Bias Current-Max (IIB) | 4μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 400μV |
| Current - Output / Channel | 75mA |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 4μA |
| Programmable Power | NO |
| Power | NO |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
MAX4412EXK+T Overview
Packaging for the buffer amplifier is in the form of a 5-TSSOP, SC-70-5, SOT-353 case. Buffer amps of this type are called Voltage Feedback-types. A Tape & Reel (TR) case is used to deliver the buffer op amp. During the past two weeks, there have been close to 5 terminations. Buffer amplifier has a total of 5 pins. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. In total, the buffer amplifier consists of 5 pins. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . During the manufacturing process, this buffer amplifier is divided into 1 circuits. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The instrumentation amplifier is packed in the form of TAPE AND REEL. There is a recommendation that this electrical part be used with a supply with 1.7mA current rating.
MAX4412EXK+T Features
5 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
MAX4412EXK+T Applications
There are a lot of Maxim Integrated MAX4412EXK+T Instrumentational OP Amps applications.
- MP3
- Video data acquisition
- Mobile phone
- Scintillation detectors
- Semiconductor detectors
- Professional videography
- Precision measurement
- Laptop
- Signal operation
- Radar
