MAX4450EXK+T
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifiers |
| Max Power Dissipation | 200mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4450 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 6.5mA |
| Nominal Supply Current | 6.5mA |
| Output Current | 50mA |
| Slew Rate | 485V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 6.5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~11V ±2.25V~5.5V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 210MHz |
| Unity Gain BW-Nom | 55000 kHz |
| Voltage Gain | 58dB |
| Average Bias Current-Max (IIB) | 20μA |
| Power Supply Rejection Ratio (PSRR) | 62dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Length | 2mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
MAX4450EXK+T Overview
There is a 5-TSSOP, SC-70-5, SOT-353 case package that contains the instrumentation amplifiers. Buffer amps of this type are called Voltage Feedback-types. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. There have been a total of 5 terminations over the past year. It consists of a total of 5 pins in total. This linear amplifier should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifiers. There are 5 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 4mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . Operational amplifier can operate supply current at 6.5mA. There should be no change in the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals.
MAX4450EXK+T Features
5 Pins
supply voltage of 5V
58dB voltage gain
Output Type: Rail-to-Rail
MAX4450EXK+T Applications
There are a lot of Maxim Integrated MAX4450EXK+T Instrumentational OP Amps applications.
- Communication device
- High gain DC amplifier
- Weighing systems
- RF cable systems
- earphone
- Image computer boards
- single/dual op amp sum and difference circuits
- Video computer boards
- Radiation thermometry transducers
- Professional videography
