MAX4521CEE

80ns, 30ns SPST - NC 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4521 16 Pins 1nA 5V 16-SSOP (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4521CEE
Package: 16-SSOP (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 618
Description: 80ns, 30ns SPST - NC 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4521 16 Pins 1nA 5V 16-SSOP (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SSOP (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2007
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	100Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	696mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.635mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4521
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	6V
Power Supplies	3/5/+-5V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	12V
Min Supply Voltage	2V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	80 ns
Voltage - Supply, Single/Dual (±)	2V~12V ±2V~6V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	250 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	2V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	2pF 2pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	80ns, 30ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-90dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	30ns
Normal Position	NC
Height Seated (Max)	1.75mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant

MAX4521CEE Overview

Presented in 16-SSOP (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tube is used. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Operating temperature extended to 0°C~70°C TA. Totally, there are 16 terminations. A electrical component with 1 channels is capable of high-quality output. A 5V voltage supply should turn on and run the electronic component. 16 pins are injected to the electronic part body. A SPST - NC switching circuit is used for these analog switches. There are 4 circuits in this switch device. Search with MAX4521 if you are looking for analog multiplexer variants. There is 100Ohm internal resistance in this digital multiplexer. The datasheets for the 16 pins explain the functions. In this analog multiplexer, the value is Multiplexer or Switches. In normalcircumstances, users should not exceed 12V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 2V is the lowest voltage that should be fed to the electronic electronic part. For this digital switch to work, 1μA current would suffice. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. It is recommended that you attach at least 2V to your dual power supply. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. 6V operating voltages can be used with this electrical part. This electronic part has additional features, such as: ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY.