MAX4526EUA+
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4526 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | +-15V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Analog IC - Other Type | SPST |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±4.5V~18V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 175Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPDT |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 0.1ns |
| Switch-off Time-Max | 0.1ns |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
MAX4526EUA+ Overview
This electronic part is conveniently packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 2:1. Operating temperature around -40°C~85°C TA extended. In total, there have been 8 terminations. Due to its 1 channels, the electrical component produces high-quality output. A 15V voltage supply should turn on and run the electronic component. This electrical component is included in the 8 series of products. A SPDT switching circuit is used for these analog switches. There are 2 circuits in this switch device. Try searching with MAX4526 if you're looking for variants. Datasheets for functions of 8 pins are available. Theswitch device is a typical Multiplexer or Switches. A SPST analog IC is integrated into the board.
MAX4526EUA+ Features
1 Channels
Switch Circuit: SPDT
MAX4526EUA+ Applications
There are a lot of Maxim Integrated MAX4526EUA+ Analog Switches & Multiplexers ICs applications.
- Audio signal routing
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Private Branch Exchange (PBX)
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- New designs requiring multiplexer functions
- Microprocessor controlled systems
- Fiber In The Loop (FITL)
- Fault Tolerant Systems
- Cellular phones
- T1/E1 Terminals
