MAX4619EUE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 10Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 533mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4619 |
| Pin Count | 16 |
| Power Supplies | 2.5/5V |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Max Supply Current | 1μA |
| Turn On Delay Time | 15 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 10 ns |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 8.5pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 15ns, 10ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -96dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 20ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Signal Current-Max | 0.075A |
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4619EUE+T Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Operating temperature extended to -40°C~85°C TA. Total terminations are 16. Due to its 1 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 3.3V voltage supply. The electronic part body is injected with 16 pins. On the other hand, analog switches can be constructed using SPDT switching circuits. 3 circuits are used in this analogue multiplexer. MAX4619 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 10Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. Multiplexer or Switches is a typical switch device. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. An effective Single supply digital multiplexer. There should be 2V voltage fed to the electrical part below 2V. A voltage of 2V~5.5V is required to drain this analog switch from a single voltage supply. A voltage higher than 1μA may cause damage to the switch multiplexer.
MAX4619EUE+T Features
1 Channels
Switch Circuit: SPDT
MAX4619EUE+T Applications
There are a lot of Maxim Integrated MAX4619EUE+T Analog Switches & Multiplexers ICs applications.
- Private Branch Exchange (PBX)
- Relay Replacement
- Battery Powered Systems
- HDTV
- Cross Connects
- Video switching
- Fiber In The Loop (FITL)
- Ultrasound
- Imaging
- Isolation
