MAX4820EUP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 20 |
| Weight | 190.990737mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 2Ohm |
| Terminal Finish | TIN |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.739W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX4820 |
| Pin Count | 20 |
| Output Voltage | 400mV |
| Output Type | N-Channel |
| Max Output Current | 150mA |
| Power Supplies | 3.3/5V |
| Interface | SPI |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 50μA |
| Output Configuration | Low Side |
| Output Current | 300mA |
| Turn On Delay Time | 1 μs |
| Switch Type | Relay, Solenoid Driver |
| Output Current per Channel | 70mA |
| Rise Time | 2μs |
| Fall Time (Typ) | 2 μs |
| Turn-Off Delay Time | 1 μs |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 2.3V~5.5V |
| Number of Drivers | 8 |
| Rds On (Typ) | 2 Ω |
| Built-in Protections | TRANSIENT |
| Height | 950μm |
| Length | 6.6mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX4820EUP+ Overview
It is packaged in the manner of a Tube.It's included in the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package.The mounting type of the LED driver is Surface Mount.Relay, Solenoid Driver is the switch type it owns.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.Voltage output is N-Channel volts at maximum.It is part of the MAX4820 family of LED drivers.It contains 20 terminations.The 20 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.It is necessary to reduce the maximum output current to 150mA to meet the operation criteria.Using a voltage of 3.3V allows for high efficiency.Surface Mount is mounted in the way.This LED driver is equipped with a total of 20 pins.Currently, the LED driving board has 2Ohm resistance.When this is the case, the output current is set to 300mA.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.It has a power supply of 3.3/5V.In addition to 5.5VV, it can handle other voltages as well.Supply voltages as low as 2.3VV are possible.The part has 8 drivers.
MAX4820EUP+ Features
Supplied from 3.3V
Resistance of 2Ohm
MAX4820EUP+ Applications
There are a lot of Maxim Integrated MAX4820EUP+ Power Switches ICs applications.
- Hot Swaps
- USB Ports/Hubs
- Gaming
- Hot Swap
- PDAs
- Hot Swap
- Solid State Drivers
- Portable Music Players
- Portable GPS Device
- Portable Video Game Players
