MAX4820EUP+T
| Parameters | |
|---|---|
| Voltage - Load | 2.3V~5.5V |
| Number of Drivers | 8 |
| Rds On (Typ) | 2 Ω |
| Max Junction Temperature (Tj) | 150°C |
| Built-in Protections | TRANSIENT |
| On-State Resistance | 2Ohm |
| Height | 1.1mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 2Ohm |
| Terminal Finish | TIN |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.739W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX4820 |
| Pin Count | 20 |
| Output Voltage | 400mV |
| Output Type | N-Channel |
| Max Output Current | 70mA |
| Operating Supply Voltage | 5V |
| Interface | SPI |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.3V |
| Nominal Supply Current | 70μA |
| Output Configuration | Low Side |
| Output Current | 70mA |
| Turn On Delay Time | 1 μs |
| Switch Type | Relay, Solenoid Driver |
| Output Current per Channel | 70mA |
| Rise Time | 200ns |
| Fall Time (Typ) | 200 ns |
| Turn-Off Delay Time | 1 μs |
| Ratio - Input:Output | 1:8 |
MAX4820EUP+T Overview
It is packaged in the manner of a Tape & Reel (TR).Package 20-TSSOP (0.173, 4.40mm Width) Exposed Pad contains it.The lighting driver is mounted in the Surface Mount position.This switch is of type Relay, Solenoid Driver.To ensure reliable operation, set the temperature to -40°C~85°C TA.Voltage output is N-Channel volts at maximum.It comes under the family of MAX4820.There are 20 terminations in it.For operation, we use the 20 pins.As far as the lighting driver is concerned, there are 1 functions.The maximum output current drops to 70mA in order to meet the operation criteria.With a supply voltage of 3.3V, high efficiency is possible.The LED driving board is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 20 pins.Currently, the LED driving board has a resistance of 2Ohm ohms.In this case, the output current will be set to 70mA.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.In order to achieve the best efficiency, the supply voltage should be set to 5V.This LED driving board can handle voltages up to 5.5VV.Supply voltages as low as 2.3VV are possible.It has 8 drivers in the part.
MAX4820EUP+T Features
Supplied from 3.3V
Resistance of 2Ohm
MAX4820EUP+T Applications
There are a lot of Maxim Integrated MAX4820EUP+T Power Switches ICs applications.
- Telecom and Network Systems
- Smart Phones, Feature Phones
- Portable Devices
- Mobile Communication Devices
- Set-Top Boxes
- Wireless Modem Data Cards
- Wireless Headsets
- Portable Music Players
- Notebook and Tablet Computers
- HDD and SSD
