MAX4822ETP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 2.7Ohm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 1.35W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX4822 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Output Voltage | 400mV |
| Output Type | N-Channel |
| Max Output Current | 150mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | SPI |
| Nominal Supply Current | 1.6mA |
| Output Configuration | Low Side |
| Output Current | 70mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Output Current per Channel | 70mA |
| Rise Time | 2μs |
| Fall Time (Typ) | 2 μs |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 2.3V~5.5V |
| Turn On Time | 1 µs |
| Rds On (Typ) | 2.7 Ω |
| Turn Off Time | 3 µs |
| Built-in Protections | THERMAL |
| Height | 750μm |
| Length | 4.1mm |
| Width | 4.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX4822ETP+ Overview
A Tube is used to package it.It is included with the 20-WFQFN Exposed Pad package as well.In this case, the LED driving board is mounted as Surface Mount.This switch is of type Relay, Solenoid Driver.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.There is a default setting of 8 for output.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts.There is a MAX4822 family of things that it belongs to.The termination count is 20.20 pins are used for operation.Currently, the lighting driver has a total of 8 functions.Maximum output current falls to 150mA when operation criteria are met.Supply voltages of 2.7V allow for high efficiency.It is positioned in the direction of Surface Mount.In total, it has 20 pins.Currently, the LED driving board has 2.7Ohm resistance.When this case is used, the output current is set to 70mA.A maximum supply voltage of 5.5V is set in Vsup.For normal operation, the supply voltage (Vsup) must be kept above 2.3V.
MAX4822ETP+ Features
Supplied from 2.7V
Resistance of 2.7Ohm
MAX4822ETP+ Applications
There are a lot of Maxim Integrated MAX4822ETP+ Power Switches ICs applications.
- Portable Devices
- USB Power Distribution
- Wireless/Networking Cards
- Portable/Handheld Devices
- HDD, SSD
- PC Cards
- Storage (HDDs, SSDs)
- HDD and SSD
- Various applications equipped with buttons
- Hot Swaps
