MAX483EESA+

8 Terminations5V 8 Pin MAX483 Receivers1 Bits 1/1 Drivers/Receivers1 Functions

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX483EESA+
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 500
Description: 8 Terminations5V 8 Pin MAX483 Receivers1 Bits 1/1 Drivers/Receivers1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	540.001716mg
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	1996
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Transceiver
Terminal Finish	Matte Tin (Sn)
Subcategory	Line Driver or Receivers
Max Power Dissipation	471mW
Technology	CMOS
Voltage - Supply	4.75V~5.25V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	MAX483
Pin Count	8
Output Voltage	3V
Operating Supply Voltage	5V
Power Supplies	5V
Interface	RS-422, RS-485
Operating Supply Current	350μA
Propagation Delay	250 ns
Supply Current-Max	0.65mA
Data Rate	250kbps
Differential Output	YES
Output Polarity	COMPLEMENTARY
Protocol	RS422, RS485
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	1/1
Driver Number of Bits	1
Receiver Number of Bits	1
Duplex	Half
Receiver Hysteresis	70mV
Number of Transceivers	1
Receive Delay-Max	2000 ns
Simplex/Duplex	Half Duplex
Transmit Delay-Max	2000 ns
Output Low Current-Max	0.004A
Height	1.5mm
Length	5mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX483EESA+ Overview

Due to the enhanced 8-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.In the Tube package, this receiver is mounted.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.This wide receiver can be placed on any Surface Mount-type PCB or development board.This differential driver requires a 4.75V~5.25V power supply.This electronic part can have?up to 1/1 eligible receivers/drivers on the field at once.?As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.With a voltage range of 5V, this driver IC can operate efficiently.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.There are 8 pinouts available on this transceiver which are market standard.Since the base part number MAX483 describes the product type, temperature, package, etc., you might get more options by searching with it.8-pin driver chip with enhanced power dissipation.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.This receiver is typically specified with a resolution of 1 bits. There is a voltage supply of 5V required in order for this transceiver module to be operated.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.This driver IC is designed to operate from a 5V power supply.This IC implements 1 transceivers overall.It is recommended that enough current be supplied to the VCC pin of the ic receiver, but not more than 0.65mA.It is capable of driving LEDs with a voltage of 350μA as the input voltage to this integrating circuit.In addWide receiverion to delivering voltage at 3V, Wide receiver also has the abilWide receivery to measure voltage.