MAX487EPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX487 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Supply Current-Max | 0.4mA |
| Data Rate | 250kbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 70mV |
| Receive Delay-Max | 2000 ns |
| Transmit Delay-Max | 2000 ns |
| Output Low Current-Max | 0.004A |
| Out Swing-Min | 1.5 V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX487EPA+ Overview
With the enhanced 8-DIP (0.300, 7.62mm) package, this driver IC is excellent for driving common LEDs.The Tube package contains this receiver.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.PCB or development board with Through Hole-type connectors can accommodate this wide receiver.In terms of power supply, this differential driver utilizes 4.75V~5.25V.At any one time, this electronic part can have up to 1/1 eligible receivers/drivers.Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.An output voltage range of 5V is sufficient to run this line driver ic efficiently.This wide receiver has 8 terminations for driving and receiving data signals.This transceiver is packaged with 8 market standard pinoutsMAX487 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.A 8-pin driver IC with enhanced power dissipation control is featured here.There is a capability of 1-bit resolution with this ic receiver.In the case of this receiver, a resolution of 1 bits is typically specified.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.Input current should not exceed 0.4mA at the VCC pin of the ic receiver.
MAX487EPA+ Features
Tube package
8 pin count
8 pins
5V power supply
MAX487EPA+ Applications
There are a lot of Maxim Integrated MAX487EPA+ Drivers/Receivers/Transceivers applications.
- Wireless modems
- Notebook
- Servers
- Cable network front end
- Switches
- Precision geodetic measurement
- Point-to-point networking
- Laser diode bonding
- Aircraft positioning
- Indoor ad hoc meeting
