MAX5054AATA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.454W |
| Technology | CMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5054 |
| Pin Count | 8 |
| Max Output Current | 4A |
| Power Supplies | 4/15V |
| Nominal Supply Current | 2.4mA |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 85ns |
| Fall Time (Typ) | 75 ns |
| Turn-Off Delay Time | 35 ns |
| Rise / Fall Time (Typ) | 32ns 26ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.07 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Turn Off Time | 0.07 μs |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5054AATA+T Overview
A higher degree of flexibility is achieved by adopting its 8-WDFN Exposed Pad package.Gate drivers is package in Tape & Reel (TR) case.There are 2 drivers installed for this device.Gate drivers is mounted in the way of Surface Mount.When the supply voltage is set to 4V~15V, it can demonstrate its superiority.A gate type of N-Channel MOSFET is used in its design.For this device, the temperature range is -40°C~150°C TJ.Inverting, Non-Inverting is used as the input type in this program.Mosfet driver is based on 8 terminations.You will find various related parts under the base part number MAX5054.The device is mounted with Surface Mount.During design, it is configured with 8 pins.The device is specifically designed to operate at 4.5V volts.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.There is a maximum output current of 4A.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.On the board, there are 8 component pins.Its maximum power dissipation of 1.454W shows its power loss capacity without overheating.Based on its power supplies of 4/15V, it solves the problem of power supply failure for a variety of applications.
MAX5054AATA+T Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 1.454W
MAX5054AATA+T Applications
There are a lot of Maxim Integrated MAX5054AATA+T gate drivers applications.
- Solar power supplies
- Uninterruptible Power Supplies (UPS)
- Isolated switch mode power supplies (SMPS)
- High frequency line drivers
- Dual-Battery Systems
- Video amplifiers
- White Goods - Air Conditioner, Washing Machine,
- Topologies
- Head-up and Head mounted displays
- Portable Media Players
