MAX5056BASA+T
| Parameters | |
|---|---|
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.1V |
| Turn Off Time | 0.07 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Base Part Number | MAX5056 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Max Output Current | 4A |
| Power Supplies | 4/15V |
| Nominal Supply Current | 2.4mA |
| Max Supply Current | 4mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 85ns |
| Fall Time (Typ) | 75 ns |
| Turn-Off Delay Time | 35 ns |
| Rise / Fall Time (Typ) | 32ns 26ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.07 μs |
| Output Peak Current Limit-Nom | 4A |
MAX5056BASA+T Overview
The 8-SOIC (0.154, 3.90mm Width) package offers greater flexibility.A packaging method of Tape & Reel (TR) is indicated.Configuration is supported by 2 drivers.Gate drivers is mounted in the way of Surface Mount.By using 4V~15V supply voltage, it is able to demonstrate its superiority.Gate type N-Channel MOSFET has been used in its design.Temperature range -40°C~150°C TJ is allowed for this device.The input type is Non-Inverting.Mosfet driver is based on 8 terminations.There are various related parts under its base part number MAX5056.In this case, Surface Mount indicates how the device is to be mounted.The device is specifically designed to function with a supply voltage of 4.5V V.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.There is an output current limit of 4A for this device.There are several useful electronic components within its subcategory MOSFET Drivers.The component has 8 pins.Considering its maximum power dissipation, 471mW shows its maximum capacity to transfer and conduct power loss without overheating.To ensure high stability, the supply current should be kept at 4mA.Using its power supply of 4/15V, it provides solutions to diverse power supply problems.
MAX5056BASA+T Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
Maximum power dissipation of 471mW
MAX5056BASA+T Applications
There are a lot of Maxim Integrated MAX5056BASA+T gate drivers applications.
- Isolated Supplies for controller area network (CAN),
- Pulse transformer drivers
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Line drivers
- Isolated switch mode power supplies (SMPS)
- Topologies
- Portable Navigation Devices
- Isolated Gate Driver Supplies
- Commercial air-conditioning (CAC)
- Telecom switch mode power supplies
