MAX5057BASA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Base Part Number | MAX5057 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Max Output Current | 4A |
| Power Supplies | 4/15V |
| Nominal Supply Current | 2.4mA |
| Max Supply Current | 4mA |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 85ns |
| Fall Time (Typ) | 75 ns |
| Turn-Off Delay Time | 35 ns |
| Rise / Fall Time (Typ) | 32ns 26ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.07 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.1V |
| Turn Off Time | 0.07 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5057BASA+T Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.Gate drivers is packaged in the way of Tape & Reel (TR).This device is equipped with 2 drivers for its configuration.It's mounted on the way to Surface Mount.By using 4V~15V supply voltage, it is able to demonstrate its superiority.There is a gate type of N-Channel MOSFET in this design.In this device, temperatures must not exceed -40°C~150°C TJ.Mosfet driver uses Inverting, Non-Inverting as Mosfet drivers input type.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Numerous related parts are available for its base part number MAX5057.The mount method is Surface Mount.A supply voltage of 4.5V is required for operation.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.4A is the maximum output current.There are several useful electronic components within its subcategory MOSFET Drivers.Components with 8 pins are available.The maximum power dissipation of 471mW shows its maximum capability to transfer and conduct power loss without overheating.Keeping the supply current at 4mA ensures greater stability.The power supply of 4/15V is able to solve the power supply problems for a wide variety of applications.
MAX5057BASA+T Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
Maximum power dissipation of 471mW
MAX5057BASA+T Applications
There are a lot of Maxim Integrated MAX5057BASA+T gate drivers applications.
- Industrial Motor Inverter - Power Tools, Robotics
- Portable Navigation Devices
- Commercial air-conditioning (CAC)
- Isolated Supplies for Motor Control
- High current laser/LED systems
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Power factor correction (PFC) circuits
- Dual-Battery Systems
- Solar power supplies
- Uninterruptible Power Supplies (UPS)
