MAX5069CAUE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5069 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 10.8V~24V |
| Control Features | Dead Time Control, Enable, Frequency Control |
| Topology | Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 25kHz~1.25MHz |
| Input Voltage (Max) | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1.25MHz |
| Max Duty Cycle | 100 % |
| Clock Sync | Yes |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5069CAUE+T Overview
Capsuled in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller suits most application needs. There is sufficient capacity to generate switching controller for outputs 1. PMIC packaging is solid with a Tape & Reel (TR) enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. 10.8V~24V is the operating voltage and supply voltage of the dc control. Qualified to work in an dc switcher with -40°C~125°C TJ. Using this switching controller, it is possible to switch at 25kHz~1.25MHz. The Surface Mount value makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Dead Time Control, Enable, Frequency Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. DUAL are the position of the terminal of the switching converters. A variety of terminations with 16 of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. Search for "MAX5069" to find other relevant dc to dc converter ics. The switching converter has a total of 16 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. A maximum voltage of 24V is accepted by the dc to dc regulator as an input voltage. You should note down the dc dc regulator's usual output current of 1A when you start a project. The duty cycle of the voltage regulator dc to dc can be set to 100 % on power-up or power-down to ensure reliability. This Surface Mount makes DC switcher suitable for most prototypes and applications. DC regulator has a maximum frequency of 1.25MHz.
MAX5069CAUE+T Features
Transistor Driver Outputs
Switching Frequency: 25kHz~1.25MHz
Dead Time Control, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
MAX5069CAUE+T Applications
There are a lot of Maxim Integrated MAX5069CAUE+T DC to DC converter applications.
- Drilling machines
- Direct power supply system
- Medical monitoring systems
- Product testing
- Series voltage regulation circuits
- Handheld GPS
- Scientific research
- Smoke exhaust equipment
- Overvoltage protection circuits in TV sets
- Flaw detection equipment
