MAX5079EUD+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | N+1 ORing Controller |
| Terminal Finish | MATTE TIN (800) |
| Applications | Base Station-Networking Line Cards, Servers |
| HTS Code | 8542.31.00.01 |
| Subcategory | MOSFET Drivers |
| Technology | BICMOS |
| Voltage - Supply | 2.75V~13.2V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5079 |
| Pin Count | 14 |
| JESD-30 Code | R-PDSO-G14 |
| Power Supplies | 3/13V |
| Current - Supply | 4mA |
| FET Type | N-Channel |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Turn On Time | 25 µs |
| High Side Driver | YES |
| Turn Off Time | 0.2 µs |
| Delay Time - OFF | 200μs |
| Delay Time - ON | 10μs |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5079EUD+T Overview
A 14-TSSOP (0.173, 4.40mm Width) case is included. The Tape & Reel (TR) case is ideal for packing the part. There are two ways in which this part is mounted. We give it a voltage of 2.75V~13.2V in order to test it. In order for this component to operate properly, its minimum operating temperature must not exceed -40°C~85°C. It is designed to fit the component that is connected in Base Station-Networking Line Cards, Servers position. Device N+1 ORing Controller belongs to the N+1 ORing Controller category. A N-Channel-type FET can be identified. The part comes with 14 terminations. In this case, 14 pins have been used to design it. It is based on the MAX5079 component. To deliver its performance, it's powered by the 12V platform. In order to run 260, a part's peak reflow temperature is utilized. There is a requirement that the supply current be run for the part at 4mA in order to complete the operation. The part is from MOSFET Drivers family. The voltage at 3/13V can be delivered by it.
MAX5079EUD+T Features
in a 14-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
14 terminations
Peak Reflow Temperature (Cel) : 260
MAX5079EUD+T Applications
There are a lot of Maxim Integrated MAX5079EUD+T Ideal Diode controller applications.
- Active ORing for redundant power supplies
- Industrial transport
- Active OR-ing of Redundant (N+1) Power Supplies
- AC Rectifier
- Modems
- Automotive ADAS systems - camera
- PDAs
- Automotive USB hubs
- Factory automation and control - PLC digital output modules
- Reverse Polarity Protection
