MAX620EWN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 762mW |
| Technology | TTL |
| Voltage - Supply | 4.5V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX620 |
| Pin Count | 18 |
| JESD-30 Code | R-PDSO-G18 |
| Max Output Current | 25mA |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 500μA |
| Output Current | 25mA |
| Max Supply Current | 500μA |
| Input Type | Non-Inverting |
| Rise Time | 1.7μs |
| Fall Time (Typ) | 2.5 μs |
| Rise / Fall Time (Typ) | 1.7μs 2.5μs |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 4 |
| Output Peak Current Limit-Nom | 0.025A |
| Driven Configuration | High-Side |
| Gate Type | N-Channel MOSFET |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height Seated (Max) | 2.65mm |
| Length | 11.55mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX620EWN Overview
A higher degree of flexibility is achieved by adopting its 18-SOIC (0.295, 7.50mm Width) package.A packaging method of Tube is used.Configuration is based on 4 drivers.Surface Mount is mounted in the way.In the absence of a power supply voltage of 4.5V~16.5V V, it is able to demonstrate its superiority.Gate type N-Channel MOSFET has been used in its design.The allowable temperature range that this device can be operated in is -40°C~85°C TA.The input type is Non-Inverting.It's configured with 18 terminations.There are various related parts under its base part number MAX620.Mosfet driver is mounted using the Surface Mount method.Mosfet driver is designed specifically to run on 5V volts of power.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 25mA that can be achieved.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.A total of 18 pins are available for component connections.25mA is the maximum output current supported by the device.Based on the maximum power dissipation of 762mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.Mosfet gate drivers is recommended that you keep the supply current at 500μA in order to achieve greater stabilMosfet gate driversy.The power supply of 5V is able to solve the power supply problems for a wide variety of applications.During the operation of the system, the voltage of the operating supply should be set to 5V.
MAX620EWN Features
Embedded in the Tube package
4 drivers
Employing a gate type of N-Channel MOSFET
Maximum power dissipation of 762mW
MAX620EWN Applications
There are a lot of Maxim Integrated MAX620EWN gate drivers applications.
- 3-Phase Motor Inverter Driver
- Isolated switch mode power supplies (SMPS)
- Pulse transformer drivers
- Multicolor LED/laser displays
- Solar inverters
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- A/D drivers
- High current laser/LED systems
- Industrial motor drives - compact, standard, premium, servo drives
- High power buffers
