MAX6709BUB+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 444mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX6709 |
| Output | Open Drain or Open Collector |
| Pin Count | 10 |
| Power Supplies | 2.5/5V |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 35μA |
| Power Dissipation | 444mW |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.32V 3.08V 4.63V Adj |
| Number of Voltages Monitored | 4 |
| Reset Timeout | <1ms Minimum |
| Supply Current-Max (Isup) | 0.065mA |
| Min Reset Threshold Voltage | 3.3V |
| Max Reset Threshold Voltage | 5.5V |
| Undervoltage Threshold | 2.25V |
| Overvoltage Threshold | 2.38V |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6709BUB+ Overview
There are 10 terminals connected to this power management, which makes it easy to mount. Packaged in a Tube-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. There are 4 channels available on this supervisor, and each channel has a different function. Please refer to power management for 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. When 5V is applied to the power ic, it conducts. Power ics operate at 4 supply voltages. Surface Mount is the one that mounts power management. The power management belongs to the Power Management Circuits subcategory. In total, it has 10 pins on IC management. Pin count of the power management is 10. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 2V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. In order to maintain a stable supply current for the power management, 35μA is the recommended value. You can always use MAX6709, the base supervisor number, to search for similar PMICs of the manufacturer. This power management requires 2.5/5V power to work.
MAX6709BUB+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2V
35μA operating supply current
MAX6709BUB+ Applications
There are a lot of Maxim Integrated MAX6709BUB+ Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- Power communication system
- Solar power charger
- Medical-specific insulation monitor
- Battery-powered equipment
- DC stabilized power supply module
- Fire equipment power monitoring system
- Electric heating appliances
- Leakage current detection
- Radar
