MAX680CPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 930.006106mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 8kHz |
| Base Part Number | MAX680 |
| Function | Ratiometric |
| Number of Outputs | 2 |
| Output Voltage | 10V |
| Output Type | Fixed |
| Max Output Current | 120mA |
| Input Voltage-Nom | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SWITCHED CAPACITOR CONVERTER |
| Operating Supply Current | 2mA |
| Output Configuration | Positive and Negative (Dual Rail) |
| Current - Output | 10mA |
| Max Output Voltage | 10V |
| Voltage - Output (Min/Fixed) | ±2Vin |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Synchronous Rectifier | No |
| Min Output Voltage | -10V |
| Switcher Configuration | DOUBLER INVERTER |
| Height | 4.45mm |
| Length | 9.91mm |
| Width | 7.87mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX680CPA+ Overview
It uses the Tube package in order to optimize the performance of this voltage regulator. As you can see, this harley voltage regulator contains 8 terminations. There is a SWITCHED CAPACITOR CONVERTER type analog IC in this voltage regulator 12v that is used to convey analog signals. The harley voltage regulator is available as a 8-DIP (0.300, 7.62mm) package to save space. There are 2 outputs on DC DC switching regulator. On the output pins of this DC DC switching regulator, there is a Fixed output generated. Through Hole-mounting is compatible with this switching regulator. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at 0°C~70°C TA. The adjusting voltage regulator's output voltage (Min/Fixed) is ±2Vin. The output current of 10mA makes dc to dc voltage regulator feature maximum design flexibility. A regulator voltage's peak reflow temperature amounts to 260 being indestructible. For operation, switching regulator requires a nominal input voltage of 5V. The regulator voltage is included in the Other Analog ICs subcategory of voltage regulators. As a member of the MAX680 family of DC/DC regulators, this is a DC/DC regulator. The adjusting voltage regulator's output voltage is maintain at 10V. To operate the voltage regulator 12v, 8 pins are required. There should be at least a -10V volt output voltage for this switching regulator in order to make it work properly. Voltage regulator's maximal output current reaches 120mA A to meet the operation requirements. Using this voltage regulator 12v, you will be able to get the maximum output voltage of 10V. In this case, a dc to dc voltage regulator's minimum supply voltage of 2V volts is required to ensure reliable performance. An operating voltage of 6V is the maximum supply voltage DC DC switching regulator can operate at. A frequency of 8kHz allows dc to dc voltage regulator to maintain high accuracy. This DC DC switching regulator operates from a supply current of 2mA. It is a voltage regulator with 1 channels.
MAX680CPA+ Features
2 outputs
Peak reflow temperature (Cel) of 260
8 pins
1 channels
MAX680CPA+ Applications
There are a lot of Maxim Integrated MAX680CPA+ Voltage Regulators applications.
- Overvoltage protection circuits in TV sets
- USB circuits
- Computer application technology
- Handheld GPS
- Network technology
- Scientific testing
- Combined machine tools
- Servo drive system
- Mobile phones
- Correction machines
