MAX708TESA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Power Supply Monitor, Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | MANUAL RESET, POWER FAIL COMPARATOR |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Pin Count | 8 |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Power Dissipation-Max | 470.6mW |
| Operating Supply Current | 135μA |
| Nominal Supply Current | 65μA |
| Adjustable Threshold | NO |
| Reset | Active High/Active Low |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140 ms |
| Supply Current-Max (Isup) | 0.5mA |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Threshold Voltage | +3.08V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MAX708TESA Overview
It is mounted through 8 terminals on the power management. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. To assist you, this PMIC includes SOIC functions. As with other Power Supply Monitor, Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. There is a specification for the peak reflow temperature of the package to be 245. Manage ics operate at 3V supply voltages. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. In total, it has 8 pins on IC management. There are 8 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.2V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. For this power management, there is an 135μA volt supply current. Additionally, there are many other features that can be found inside of the power management, such as [0]. There is a requirement for 5V power to power this power management.
MAX708TESA Features
Power Supply Monitor, Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
135μA operating supply current
MAX708TESA Applications
There are a lot of Maxim Integrated MAX708TESA Voltage Supervisors applications.
- FPGA design
- Power distribution systems of ICU
- Solar power charger
- Computer applications
- Important electronics for automotive protection
- Digitally controlled LDO regulators circuit
- Set top box
- Automotive power systems
- Insulation fault location system
- DVR
