MAX741DCAP+
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX741 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Step-Up, Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Voltage - Supply (Vcc/Vdd) | 2.7V~15.5V |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 2.7V |
| Topology | Buck, Boost |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 4.25mA |
| Synchronous Rectifier | No |
| Switcher Configuration | PUSH-PULL |
| Clock Sync | Yes |
| Length | 7.2mm |
| Width | 5.29mm |
| RoHS Status | ROHS3 Compliant |
MAX741DCAP+ Overview
Capsuled in the 20-SSOP (0.209, 5.30mm Width) package, the switching controller suits most application needs. There is sufficient capacity to generate switching controller for outputs 1. Packaging for the pmic consists of Tube solid enclosures. A total of Transistor Driver dc switching's outputs can be handled by it. DC control operates at 2.7V~15.5V volts and has 2.7V~15.5V supply voltage. Workable in an dc switcher where 0°C~70°C TA is the 0°C~70°C TArm. As it has a Surface Mount value, it can be used for general dc dc regulator. Frequency Control, Soft Start provides dcdc regulator efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. The 20 terminations can be used for a wide range of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. You can find other relevant dc to dc converter ics by searching "MAX741". It is recommended that the input voltage of the dc dc voltage regulator be 2.7V. A value of 1A is output as the maximum value of current. It is not recommended to supply more current to the controller than 4.25mA.
MAX741DCAP+ Features
Transistor Driver Outputs
Frequency Control, Soft Start
PULSE WIDTH MODULATION
MAX741DCAP+ Applications
There are a lot of Maxim Integrated MAX741DCAP+ DC to DC converter applications.
- seismic instrument power circuits
- Hydraulic presses
- Digital display device
- Mobile phones
- Grinders
- Flaw detection equipment
- Current source circuits
- Surge protection circuits
- Various precision measuring detectors
- Emergency lighting monitoring equipment
