banner_page

MAX793TESE+

3.3V16 Terminals 16-Pin MAX793 Voltage supervisor2 Channels Min 1.1V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX793TESE+
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 649
  • Description: 3.3V16 Terminals 16-Pin MAX793 Voltage supervisor2 Channels Min 1.1V Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2011
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Battery Backup Circuit
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Max Power Dissipation 696mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Base Part Number MAX793
Output Open Drain, Push-Pull
Pin Count 16
Power Supplies 3.3/5V
Number of Channels 2
Max Supply Voltage 5.5V
Min Supply Voltage 1.1V
Operating Supply Current 62μA
Nominal Supply Current 62μA
Adjustable Threshold NO
Watchdog Timer Yes
Reset Active High/Active Low
Voltage - Threshold 3.075V
Number of Voltages Monitored 1
Reset Timeout 140ms Minimum
Supply Current-Max (Isup) 0.08mA
Height 1.5mm
Length 10mm
Width 4mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX793TESE+ Overview


As you can see, this power management is mounted through 16 terminals. Packaged in the form of a Tube, power management is easy to use. In this IC power you will find 1 functions for you to refer to. This power management is made up of 2 channels which are available in a series format. As a reference, this IC power includes 16-SOIC (0.154, 3.90mm Width) functions for your convenience. There are a lot of similarities between this IC power and other Battery Backup Circuit products. During the reflow process, a peak temperature of 260 is specified for the package. When a supply voltage of 3.3V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. The power management belongs to the Power Management Circuits subcategory. In total, the power management has 16 pins in it. Pin count of the power management is 16. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. Power management has an output of Open Drain, Push-Pull during operation. In order to maintain a stable supply current for the power management, 62μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using MAX793, the base power ics number. To be able to work, this power management requires 3.3/5V volts of power.

MAX793TESE+ Features


Battery Backup Circuit type
Minimum supply voltage of 1.1V
62μA operating supply current

MAX793TESE+ Applications


There are a lot of Maxim Integrated MAX793TESE+ Voltage Supervisors applications.

  • Multi-voltage system
  • DC stabilized power supply module
  • Telecommunications equipment
  • Insulation fault location system
  • Electronics installed in the vehicle
  • Radio
  • External alarm
  • Embedded computing
  • WiFi router
  • Digitally controlled LDO regulators circuit

Write a review

Note: HTML is not translated!
    Bad           Good