MAX805LCPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX805 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 200μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.35mA |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 4.45mm |
| Length | 9.91mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX805LCPA+ Overview
As you can see, this power management is mounted through 8 terminals. There is a Tube-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. Please find attached 8-DIP (0.300, 7.62mm) functions for your reference in this IC power. As with other Battery Backup Circuit products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 5V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Through Hole mounts IC management. It is possible to subcategorize this power ic as a Power Management Circuits chip. There are a total of 8 pins on power management. The pins of the power management system count 8. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Through HoleIt is recommended to set the supervisor's temperature to this range: 0°C~70°C TA. Power management has an output of Push-Pull, Totem Pole during operation. Supplied with a operating current of 200μA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX805, which is the base power ics number. It is necessary to have 5V volts of power in order for this voltage supervisor to operate.
MAX805LCPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 1.1V
200μA operating supply current
MAX805LCPA+ Applications
There are a lot of Maxim Integrated MAX805LCPA+ Voltage Supervisors applications.
- Magnetic resonance imaging
- FPGA design
- Electronics installed in the vehicle
- Telecommunications equipment
- Linux and server computing
- Electrical fire monitoring system
- Kitchen appliances
- Microcontroller system
- Important electronics for automotive safety
- Household appliances
