MAX808LCPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CMOS RAM WRITE PROTECTION, BATTERY-BACKUP MODE |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX808 |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 48μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.675V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.09mA |
| Min Reset Threshold Voltage | 4.6V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.6V |
| Overvoltage Threshold | 4.75V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX808LCPA+ Overview
It is mounted through 8 terminals on the power management. There is a Tube-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find 8-DIP (0.300, 7.62mm) functions for your reference. There are a lot of similarities between this IC power and other Battery Backup Circuit products. The package peak reflow temperature is specified to be 260. Manage ics operate at 5V supply voltages. In a 1 supply voltage, the PMIC chip conducts. The mount is attached to Through Hole. It is possible to subcategorize this power ic as a Power Management Circuits chip. 8 pins are present in total in this power management. 8 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 0V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. A Through Hole mounting type is recommended. This range of temperature should be set for the supervisors: 0°C~70°C TA. There is a 48μA supply current present in the power management. Power management is also possible to add other features such as CMOS RAM WRITE PROTECTION, BATTERY-BACKUP MODE to name a few. You can always use MAX808, the base supervisor number, to search for similar PMICs of the manufacturer. A power supply of 5V watts is required for the operation of this power management.
MAX808LCPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
48μA operating supply current
MAX808LCPA+ Applications
There are a lot of Maxim Integrated MAX808LCPA+ Voltage Supervisors applications.
- Smart meter
- Sensitive sensors
- Functional modules
- Leakage protection
- Stable power system
- Display equipment
- Cloud computing
- Leakage current detection
- Digitally controlled LDO regulators circuit
- Consumer electronics
