MAX809JTR
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn80Pb20) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4V |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 800nA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.0025mA |
| Threshold Voltage | +4V |
| Undervoltage Threshold | 4V |
| Overvoltage Threshold | 4.06V |
| Length | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX809JTR Overview
There are 3 terminals on this power management that allow it to be mounted. Power management is packaged in a Tape & Reel (TR) way. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of TO-236-3, SC-59, SOT-23-3 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 240. During operation, the power ic is supplied with a voltage of 3.3V. IC management is possible to find a succession of 1 voltages that have been checked. The mount is provided by Surface Mount. The power management belongs to the Power Management Circuits subcategory. The total number of pins on this power management is 3. Power managment ic pin count is 3. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type for IC management is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~105°C TJ. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 800nA is the recommended value. Among other features, IC power can be also taken advantage of [0], for instance. A similar IC managements number of the manufacturer can always be found by using MAX809, the base power ics number.
MAX809JTR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
800nA operating supply current
MAX809JTR Applications
There are a lot of ON Semiconductor MAX809JTR Voltage Supervisors applications.
- Leakage current detection
- Display equipment
- Functional modules
- Detection of phase imbalance
- Analog circuit
- Power distribution systems of ICU
- Important electronics for automotive safety
- emergency room
- Medical-specific isolation transformer
- Consumer electronics
