MAX8630ZETD18+T
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFDFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | MATTE TIN |
| Applications | Backlight |
| Max Power Dissipation | 1.454W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.4mm |
| Frequency | 1MHz |
| Base Part Number | MAX8630 |
| Pin Count | 14 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 5.5V |
| Power Dissipation | 1.454W |
| Max Supply Current | 1.4mA |
| Input Voltage (Min) | 2.7V |
| Topology | Switched Capacitor (Charge Pump) |
| Output Current per Channel | 25mA |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Dimming | Multi-Step |
| Voltage - Supply (Min) | 2.7V |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
MAX8630ZETD18+T Overview
To save board space, it uses the 14-WFDFN Exposed Pad package. There are 5 outputs used for the design of this LED drivers.It adopts the way of Surface Mount for mounting.In this case, the DC DC Regulator emerges as highly efficient and reliable.The led light driver operates normally at -40°C~85°C TA. There are significant benefits for Backlight.The frequency of 1MHz is used as the basis for its operation.In this case, there are 14 terminations.In this LED driver, the base is configured as 14.It is possible for undetermined failures to occur if the voltage supply is lower than 2.7V.As you can see, it is mounted by Surface Mount.The base part number for this LED driver is MAX8630.It is acceptable for the voltage to be 5.5V.There are 14 pins on it.The device can deliver high efficiency when the maximal supply current is less than 1.4mA.The power of systems depends on having 5.5V voltages inside.Device operation requires 3.6V volts from the circuit.When its input voltage exceeds 2.7V, its operation is convenient.
MAX8630ZETD18+T Features
Available in the 14-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Operating with the supply voltage of 5.5V
MAX8630ZETD18+T Applications
There are a lot of Maxim Integrated MAX8630ZETD18+T LED Driver ICs applications.
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Stage Lighting and Signage
- Linear fluorescent
- LED headlights
- Dimmable LED for vehicle interiors
- Portable lighting
- A- lamps
- Gallery lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Replacement lamps
