MAX8650EEG+T
| Parameters | |
|---|---|
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX8650 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~1MHz |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1.2MHz |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
MAX8650EEG+T Overview
It comes in a 24-SSOP (0.154, 3.90mm Width) package, so switching controller can be used for most applications. 1 outputs are supported by the dc motor controller. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sdc controls with 4.5V~28V voltage are supplied and operated. Work well in dc switchers with a -40°C~85°C TA. Switching can be done at 200kHz~1MHz with this switching controller. It is suitable for general dc dc regulator when it is set to Surface Mount. The dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start for efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of terminations with 24 of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. Other relevant dc to dc converter ics will be returned if you search "MAX8650". The switching converter has a total of 24 pins. Switching converter is a type of Switching Regulator or Controllers in particular. Input voltage of dc dc voltage regulator must be 4.5V. Based on the test statistics, DC regulator outputs voltage 5.5V. Voltages 28V are the maximum that the dc to dc regulator will accept. You should note down the dc dc regulator's usual output current of 25A when you start a project. DC switcher's Surface Mount qualifies it for most applications and prototypes. This dc regulatorhas a max frequency of 1.2MHz.
MAX8650EEG+T Features
Transistor Driver Outputs
Switching Frequency: 200kHz~1MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
MAX8650EEG+T Applications
There are a lot of Maxim Integrated MAX8650EEG+T DC to DC converter applications.
- Driver circuits
- Drilling machines
- Printing equipment
- Computer-related products
- PSRR circuits
- Milling machines
- Various precision measuring instruments
- Production lines
- Emergency lighting monitoring equipment
- Various CNC machine tools
