MAX8655ETN+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-WFQFN Exposed Pad |
| Number of Pins | 56 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Base Part Number | MAX8655 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Adjustable |
| Max Output Current | 25A |
| Operating Supply Voltage | 25V |
| Voltage - Input (Min) | 4.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Max Output Voltage | 5.5V |
| Voltage - Output (Min/Fixed) | 0.7V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 700mV |
| Voltage - Output (Max) | 5.5V |
| Height | 730μm |
| Length | 8mm |
| Width | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX8655ETN+ Overview
As a result of the use of the Tube package, the performance of this voltage regulator is optimized. There are 56 terminations in this voltage regulator. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHING REGULATOR. There is a 56-WFQFN Exposed Pad package available for this voltage regulator, as DC DC switching regulator is space-saving. There are 1 outputs configured on the voltage regulator. DC DC switching regulators like this one generate Adjustable outputs on their output pins to handle the power management. Surface Mount-mounting is compatible with this switching regulator. Keeping dc to dc voltage regulator's operating temperature at -40°C~125°C TJ is essential when operating. There is a switching frequency of 200kHz~1MHz for this voltage regulator 12v. Voltage regulators like this one can operate at least with 4.5V as the dc to dc voltage regulator's minimum input voltage. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.7V. As a result of its peak reflow temperature, this voltage regulator is virtually indestructible. Voltage regulator is designed to provide a nominal input voltage of 12V to meet the operation requirements. The regulator voltage that you are looking at belongs to the subcategory Switching Regulator or Controllers. DC/DC regulators such as this one belong to the MAX8655 family of products. Voltage regulator is capable of giving voltage at 5.5V volts. 56 pins are used for switching regulator operation. This voltage regulator 12v should be configured with an output voltage that is at least 700mV. For switching regulator maximum operation, dc to dc voltage regulator delivers 25A A. On the basis of 5.5V's maximal output voltage, DC DC switching regulator can be operated easily. A maximum voltage of 5.5V can be obtained from the regulator voltage. 25V is the supply voltage for this DC-DC switching regulator. With a frequency of 1MHz, dc to dc voltage regulator maintains high accuracy.
MAX8655ETN+ Features
1 outputs
Peak reflow temperature (Cel) of 260
56 pins
Operating supply voltage of 25V
MAX8655ETN+ Applications
There are a lot of Maxim Integrated MAX8655ETN+ Voltage Regulators applications.
- Domestic water pumps
- Computer monitoring equipment of building
- Linear guide
- Sink circuits
- Printing
- Production lines
- Adjustable voltage or current linear circuits
- Overvoltage protection circuits in TV sets
- Special machining machine tools
- Hydraulic presses
