MAX9018AEKA+T
| Parameters | |
|---|---|
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9018 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 2.3μA |
| Output Current | 50mA |
| Max Supply Current | 2.3μA |
| Propagation Delay | 31 μs |
| Quiescent Current | 2.8μA |
| Response Time | 31000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1nA |
| Input Bias Current | 1nA |
| Current - Quiescent (Max) | 2.8μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 80dB PSRR |
| Height Seated (Max) | 1.45mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Subcategory | Comparator |
| Max Power Dissipation | 727mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
MAX9018AEKA+T Overview
Electronic comparator is packaged in SOT-23-8 for convenient transportation.The comparator has an output type of CMOS, Open-Drain, Rail-to-Rail .We ship the part through Tape & Reel (TR) .There are 8 terminals on the comparator.The electrical component here belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .When it comes to types, this comparator is a typical with Voltage Reference .There are a total of 2 elements in it.Electronic comparator has 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .There are 8 pins on the comparator.Try search MAX9018 to get more pin-to-pin solutions for your special needs.The comparator presents a quiescent current of 2.8μA volts.A Surface Mount is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to 2.3μA .A current supply greater than 2.3μA may result in the comparator malfunctioning.The device can be operated with 5V power supplies.Electronic comparator is possible to input a maximum of 1nA current into the device.Comparator electronics is part of the Beyond-the-Rails? comparator series.
MAX9018AEKA+T Features
CMOS, Open-Drain, Rail-to-Rail output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 2.8μA
MAX9018AEKA+T Applications
There are a lot of Maxim Integrated MAX9018AEKA+T linear comparators applications.
- Building automation
- System control and monitoring
- Pulse, Squarewave, and Time Delay Generators
- Analog front end
- Set Top Boxes
- High-Speed Differential Line Receiver
- Window Comparators, Multivibrators
- Point of load regulators
- Infotainment & cluster
- Mobile Phones
