MAX9022AUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 362mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9022 |
| Pin Count | 8 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 2.8μA |
| Max Supply Current | 2.8μA |
| Propagation Delay | 8 μs |
| Quiescent Current | 5μA |
| Turn On Delay Time | 3 μs |
| Response Time | 8000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 1mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 3nA |
| Current - Quiescent (Max) | 5μA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 0.003μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 100dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9022AUA+ Overview
A convenient packaging is provided in the form of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .This comparator is of the CMOS, Rail-to-Rail, TTL output type.The part will be shipped by Tube .The comparator has 8 terminals.Electronic comparator is a part of Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.In terms of type, this is a typical General Purpose comparator.This element consists of 2 elements in total.A total of 8 pins are included.Electronic comparator is recommended that you mount the device using type Surface Mount .The operating temperature should be set to -40°C~125°C to avoid mal-function.The comparator is equipped with 8 pins.You can find more pin-to-pin solutions by searching MAX9022 .In this comparator, the quiescent current is 5μA .A Surface Mount is provided for mounting on PCBs or other boards.Normal operation of the device requires 2.8μA supply current.Current supply exceeding 2.8μA could cause disfunction of the compartator.
MAX9022AUA+ Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 5μA
MAX9022AUA+ Applications
There are a lot of Maxim Integrated MAX9022AUA+ linear comparators applications.
- Pulse, Squarewave, and Time Delay Generators
- Power Supervision
- Battery management and protection
- Wearable Devices
- Industrial
- Portable and Battery-Powered Systems
- Automatic Test Equipment
- Automotive
- RC Timers
- Notebooks and PDAs
