MAX908CPD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 800mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | MAX908 |
| Pin Count | 14 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Max Supply Current | 1mA |
| Propagation Delay | 50 ns |
| Quiescent Current | 1mA |
| Response Time | 45 ns |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~11V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.5μA |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 300nA |
| Input Bias Current | 300nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.3μA @ 5V |
| CMRR, PSRR (Typ) | 86.02dB CMRR, 86.02dB PSRR |
| Height | 4.45mm |
| Length | 19.43mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX908CPD+ Overview
Electronic comparator is packaged in 14-DIP (0.300, 7.62mm) for convenient transportation.A comparator with an output type of TTL is being used.We ship the part through Tube .The device is designed with 14 terminations.Electronic comparator is a part of Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Speaking of types, this is a typical General Purpose comparator.In total, it contains 4 elements.The device contains 14 pins.Electronic comparator is recommended that you mount the device using type Through Hole .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .The comparator is equipped with 14 pins.Alternatively, you may search for MAX908 to find more pin-to-pin solutions for your specific needs.The comparator presents a quiescent current of 1mA volts.The board has a Through Hole for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current be 1mA in order to use the device normally.An excess of current supply over 1mA could result in malfunction of the comparator.Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.You can input a maximum current of 300nA into this device.The operating supply voltage for normal operation should be 5V .
MAX908CPD+ Features
TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 1mA
MAX908CPD+ Applications
There are a lot of Maxim Integrated MAX908CPD+ linear comparators applications.
- Wearable Devices
- DC/DC and AC/DC power supplies
- Point of load regulators
- Industrial
- High-Speed Sampling Circuits
- Appliances
- Portable and Battery-Powered Systems
- Mobile Phones
- Simple Analog-to-Digital Converters (ADCs)
- Notebooks and PDAs
