Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
Published |
2003 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
with Latch |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Comparator |
Max Power Dissipation |
727mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
MAX912 |
Pin Count |
16 |
Output Type |
Complementary, TTL |
Number of Elements |
2 |
Power Supplies |
5/+-5V |
Nominal Supply Current |
10mA |
Output Current |
20mA |
Max Supply Current |
10mA |
Propagation Delay |
14 ns |
Quiescent Current |
10mA |
Turn On Delay Time |
16 ns |
Response Time |
10 ns |
Common Mode Rejection Ratio |
100 dB |
Voltage - Supply, Single/Dual (±) |
5V~10V |
Input Offset Voltage (Vos) |
2mV |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Voltage Gain |
70.88dB |
Average Bias Current-Max (IIB) |
8μA |
Power Supply Rejection Ratio (PSRR) |
100dB |
Supply Voltage Limit-Max |
7V |
Input Bias Current |
5μA |
Neg Supply Voltage-Max (Vsup) |
-7V |
Voltage - Input Offset (Max) |
2mV @ ±5V |
Current - Input Bias (Max) |
5μA @ ±5V |
CMRR, PSRR (Typ) |
110dB CMRR, 100dB PSRR |
Height Seated (Max) |
1.75mm |
Length |
9.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX912CSE-T Overview
The product is packaged in 16-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.The comparator has a type Complementary, TTL output.Electronic comparator is shipped by Tape & Reel (TR) .You can find 16 terminals of the comparator.Electronic comparator is a component of the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator is possible to classify the chip as with Latch .This is a 2 element comparator.The device includes 16 pins.Electronic comparator is recommended to mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .The comparator has a pin count of 16 .You can find more pin-to-pin solutions for your special requirements by searching MAX912 .The comparator presents a quiescent current of 10mA volts.A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current of the device be 10mA .If the current supply exceeds 10mA , the comparator could malfunction.A power supply of 5/+-5V is sufficient for the operation of the device.According to the voltage formula, the part has a voltage gain of 70.88dB .
MAX912CSE-T Features
Complementary, TTL output capability
with Latch IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 10mA
Voltage Gain: 70.88dB
MAX912CSE-T Applications
There are a lot of Maxim Integrated MAX912CSE-T linear comparators applications.
- Portable Battery Monitoring
- Battery-Powered Electronics
- Notebooks and PDAs
- Mobile Communications
- Window Comparators
- General Purpose Low Voltage Applications
- Lithium ion battery monitoring
- High-Speed Differential Line Receiver
- DC/DC and AC/DC power supplies
- RC Timers