MAX912ESE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 727mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX912 |
| Pin Count | 16 |
| Output Type | Complementary, TTL |
| Number of Elements | 2 |
| Power Supplies | 5/+-5V |
| Nominal Supply Current | 10mA |
| Output Current | 20mA |
| Max Supply Current | 10mA |
| Propagation Delay | 14 ns |
| Quiescent Current | 10mA |
| Turn On Delay Time | 16 ns |
| Response Time | 10 ns |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V |
| Input Offset Voltage (Vos) | 2mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 70.88dB |
| Average Bias Current-Max (IIB) | 8μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 5μA |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Voltage - Input Offset (Max) | 2mV @ ±5V |
| Current - Input Bias (Max) | 5μA @ ±5V |
| CMRR, PSRR (Typ) | 110dB CMRR, 100dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX912ESE+T Overview
In order to make transportation easier, it is packaged in 16-SOIC (0.154, 3.90mm Width) .This comparator is of the Complementary, TTL output type.This chip is designed with the Tape & Reel (TR) package.There are16 terminals on the comparator.Electronic comparator is a component of the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.In terms of type, this is a typical with Latch comparator.There are a total of 2 elements in it.The device contains 16 pins.Surface Mount universial mout for easy adapting.If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .16 pins are available on the comparator.If you require more pin-to-pin solutions, search MAX912 for more options.A quiescent current of 10mA is observed in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal operation of the device requires 10mA supply current.If the current supply exceeds 10mA , the comparator could malfunction.In order to operate the device, 5/+-5V power supplies are sufficient.According to the voltage formula, the part has a voltage gain of 70.88dB .
MAX912ESE+T Features
Complementary, TTL output capability
with Latch IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 10mA
Voltage Gain: 70.88dB
MAX912ESE+T Applications
There are a lot of Maxim Integrated MAX912ESE+T linear comparators applications.
- Body Control Modules
- Mobile Phones
- System control and monitoring
- Industrial
- Power management
- Factory automation & control
- Battery management and protection
- Lithium ion battery monitoring
- Zero-Crossing Detectors
- Window Comparators
