MAX913EPA+
| Parameters | |
|---|---|
| Length | 9.91mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 727mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX913 |
| Pin Count | 8 |
| Output Type | Complementary, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Nominal Supply Current | -1mA |
| Output Current | 20mA |
| Max Supply Current | -1mA |
| Propagation Delay | 14 ns |
| Quiescent Current | 10mA |
| Response Time | 10 ns |
| Common Mode Rejection Ratio | 110 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V |
| Input Offset Voltage (Vos) | 2mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 70.88dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 5μA |
| Current - Quiescent (Max) | 10mA |
| Voltage - Input Offset (Max) | 2mV @ ±5V |
| Current - Input Bias (Max) | 5μA @ ±5V |
| CMRR, PSRR (Typ) | 110dB CMRR, 100dB PSRR |
| Height | 4.45mm |
MAX913EPA+ Overview
The product is packaged in 8-DIP (0.300, 7.62mm) for ease of transportation.The comparator has an output type of Complementary, TTL .This device is designed in Tube case.The comparator has 8 terminals.The chip belongs to Comparator .The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Speaking of types, this is a typical with Latch comparator.Electronic comparator consists of 1 elements in total.The device contains 8 pins.In general, mounting type Through Hole is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.8 pins are available on the comparator.Search MAX913 to find more pin-to-pin solutions.There is a quiescent current of 10mA in this comparator.Mounting on PCBs or other boards is easy with the Through Hole .Normal use of the device should require a nominal supply current of -1mA .A current supply greater than -1mA may result in the comparator malfunctioning.Comparator electronics follows that the voltage gain of the part is 70.88dB .Comparator electronics is necessary to have a voltage of 5V for normal operation.
MAX913EPA+ Features
Complementary, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 10mA
Voltage Gain: 70.88dB
MAX913EPA+ Applications
There are a lot of Maxim Integrated MAX913EPA+ linear comparators applications.
- Analog front end
- Wide Range VCO; MOS Clock Timers
- Window Comparators
- Metering Systems
- Zero-Crossing Detectors
- Mobile Communications
- Factory automation & control
- Mobile Phones and Tablets
- Zero-Crossing Detectors
- Self-diagnostics
