MAX917ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 571mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX917 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 2/5V |
| Nominal Supply Current | 1.3μA |
| Output Current | 50mA |
| Max Supply Current | 1.3μA |
| Propagation Delay | 95 μs |
| Quiescent Current | 1.6μA |
| Response Time | 95000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.002μA |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 1nA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 80dB PSRR |
| Propagation Delay (Max) | 95μs |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX917ESA+ Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with a CMOS, Push-Pull, Rail-to-Rail, TTL output is used here.We ship the part through Tube .The comparator has 8 terminals.Electronic comparator is a component of the Comparators family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .It's a typical with Voltage Reference comparator.This is a 1 element comparator.The device includes 8 pins.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.The comparator has 8 pins.If you require more pin-to-pin solutions, search MAX917 for more options.As a result, this comparator displays a quiescent current of 1.6μA .The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current be 1.3μA in order to use the device normally.An excess of current supply over 1.3μA could result in malfunction of the comparator.2/5V power supplies are enough to run the device.The part belongs to the Beyond-the-Rails? series of comparator parts.
MAX917ESA+ Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.6μA
MAX917ESA+ Applications
There are a lot of Maxim Integrated MAX917ESA+ linear comparators applications.
- Limit Comparators
- General-Purpose Portable Devices
- Infotainment & cluster
- Ultra-Low Power Systems
- Simple Analog-to-Digital Converters (ADCs)
- Infotainment and Clusters
- Pulse, Squarewave, and Time Delay Generators
- Mobile Communications
- Power Supervision
- Battery management and protection
