MAX923ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | MAX923 |
| Pin Count | 8 |
| Output Type | CMOS, TTL |
| Number of Circuits | 2 |
| Nominal Supply Current | 4.5μA |
| Output Current | 50mA |
| Max Supply Current | 4.5μA |
| Propagation Delay | 12 μs |
| Quiescent Current | 7.5μA |
| Turn On Delay Time | 12 μs |
| Response Time | 14000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Current - Quiescent (Max) | 7.5μA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 50mA |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX923ESA+ Overview
In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .This comparator is of the CMOS, TTL output type.As a result, it is designed with Tube package.There are8 terminals on the comparator.Electronic comparator is a component of the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 3V voltage.Speaking of types, this is a typical with Voltage Reference comparator.Electronic comparator includes 8 pins.The recommended mounting method is Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.There are 8 pins on the comparator.You can find more pin-to-pin solutions by searching MAX923 .There is 7.5μA current flowing in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Normal operation of the device requires 4.5μA supply current.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 4.5μA .
MAX923ESA+ Features
CMOS, TTL output capability
with Voltage Reference IC
Operates under -40°C~85°C
Quiescent Current: 7.5μA
MAX923ESA+ Applications
There are a lot of Maxim Integrated MAX923ESA+ linear comparators applications.
- Infotainment & cluster
- Battery-Powered Electronics
- General-Purpose Portable Devices
- Portable Battery Monitoring
- Ultra-Low Power Systems
- Current and voltage sensing
- Portable and Battery-Powered Systems
- General Purpose Low Voltage Applications
- Appliances
- Simple Analog-to-Digital Converters (ADCs)
