MAX9705BETB+T
| Parameters | |
|---|---|
| Quiescent Current | 7mA |
| Output Power | 2.3W |
| Common Mode Rejection Ratio | 56 dB |
| Supply Type | Single |
| Bandwidth | 22 kHz |
| Voltage Gain | 12.04dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Max Output Power | 2.3W |
| Max Output Power x Channels @ Load | 2.3W x 1 @ 4 Ω |
| Load Impedance | 4Ohm |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 1.9512W |
| Technology | BICMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9705 |
| Pin Count | 10 |
| Output Type | 1-Channel (Mono) |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Nominal Supply Current | 5.4mA |
MAX9705BETB+T Overview
Amp parts is embedded in the 10-WFDFN Exposed Pad package.Amp parts is recommended that the chip be packaged in the case Tape & Reel (TR) .The 10 termination refers to terminating transmission lines with devices that match their characteristic impedance.Output 1-Channel (Mono) is configured for this device.An electrical device of type Class D is involved.The computer or other communication device has 10 pins, which are pronged contacts.The electronic component is mounted in the way of Surface Mount .This electrical device has a supply voltage of 2.5V~5.5V .Amp parts is equipped wAmp partsh 1 channels.The operation of Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown can be ensured.Amp parts is recommended that the operating temperature not exceed -40°C~85°C TA .The device is equipped with 10 pins.As part of Audio/Video Amplifiers , this part is included.This item belongs to the family of MAX9705 .There is an electronic component mounted in the way of Surface Mount .An electronic part such as this has a maximum output power of 2.3W kWh per hour.Supply type Single is assigned to this electronic part.Its consumption of quiescent current is 7mA .
MAX9705BETB+T Features
10-WFDFN Exposed Pad package
10 pin count
MAX9705 family
2.3W kWh per hour
MAX9705BETB+T Applications
There are a lot of Maxim Integrated MAX9705BETB+T audio amplifiers applications.
- Power control
- Portable electronic products powered by batteries
- High gain DC amplifier
- Integrator and differentiator circuits
- Professional videography
- Signal amplification
- Signal operation
- Logarithmic and exponential operation circuits
- Television broadcasting equipment
- Radar
