MAX9718DETB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Depop, Differential Inputs, Shutdown, Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.33.00.01 |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 1.951W |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9718 |
| Pin Count | 10 |
| JESD-30 Code | S-PDSO-N10 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Nominal Supply Current | 5mA |
| Quiescent Current | 5mA |
| Output Power | 1.4W |
| Common Mode Rejection Ratio | -60 dB |
| Bandwidth | 22 kHz |
| Power Supply Rejection Ratio (PSRR) | 93dB |
| Gain | 6 dB |
| Max Output Power | 1.4W |
| Max Output Power x Channels @ Load | 1.4W x 1 @ 4 Ω |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9718DETB+T Overview
The device is embedded in 10-WFDFN Exposed Pad .Ideally, the chip should be packaged in a Tape & Reel (TR) case.The 10 termination refers to terminating transmission lines with devices that match their characteristic impedance.1-Channel (Mono) is used for its output.Amp parts is an electrical device of type Class AB .The electronic part is positioned in the way of Surface Mount .Electrical devices like this one have a 2.7V~5.5V supply voltage.Channels 1 are present in the device.Operating with Depop, Differential Inputs, Shutdown, Thermal Protection is possible.There should be no temperature increase above -40°C~85°C TA .The number of pins is 10 .As part of Audio/Video Amplifiers , this part is included.The MAX9718 family contains this object.A part of this electronic device is mounted in the way of Surface Mount .An electronic part such as this has a maximum output power of 1.4W kWh per hour.During normal operation, the supply voltage (Vsup) should remain above 2.7V .Vsup reaches 5.5V at the maximum.The device is powered by a voltage supply of 3/5V volts.Amp parts consumes a quiescent current of 5mA .
MAX9718DETB+T Features
10-WFDFN Exposed Pad package
10 pin count
MAX9718 family
1.4W kWh per hour
MAX9718DETB+T Applications
There are a lot of Maxim Integrated MAX9718DETB+T audio amplifiers applications.
- Proportional operation circuits
- Band-pass filter
- High input resistance broadband
- Automation control systems
- Portable electronic products powered by batteries
- Communication
- Professional videography
- Communication device
- Biopotential
- Band-stop filter
