MAX975ESA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | MATTE TIN |
| Subcategory | Comparators |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5.25V |
| Base Part Number | MAX975 |
| Pin Count | 8 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 500μA |
| Max Supply Current | 500μA |
| Propagation Delay | 820 ns |
| Quiescent Current | 500μA |
| Response Time | 28 ns |
| Common Mode Rejection Ratio | 90 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.25V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.3μA |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | -300nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.1μA @ 5.25V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 90dB CMRR, 90dB PSRR |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX975ESA+T Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .Output type of this comparator is CMOS, Rail-to-Rail, TTL .This device is designed in Tape & Reel (TR) case.The comparator has 8 terminals.Electronic comparator is a component of the Comparators family.A comparator is capable of completing a variety of demanding tasks when supplied with 5.25V voltage.In terms of type, this is a typical General Purpose comparator.Electronic comparator has a total of 1 elements.Electronic comparator includes 8 pins.Surface Mount universial mout for easy adapting.As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.There are 8 pins on the comparator.If you require more pin-to-pin solutions, search MAX975 for more options.The comparator displays a quiescent current of 500μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 500μA .A current supply greater than 500μA may cause the comparator to malfunction.The device can be run with 3/5V power supplies.
MAX975ESA+T Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 500μA
MAX975ESA+T Applications
There are a lot of Maxim Integrated MAX975ESA+T linear comparators applications.
- Portable and Battery-Powered Systems
- Factory automation & control
- Ultra-Low Power Systems
- High-Speed Sampling Circuits
- DC/DC and AC/DC power supplies
- Zero-Crossing Detectors
- Hand-Held Electronics
- Window Comparators, Multivibrators
- Current and voltage sensing
- General Purpose Low Voltage Applications
