MAX996EUD+
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX996 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | +-1.5/+-2.5/3/5V |
| Nominal Supply Current | 320μA |
| Max Supply Current | 320μA |
| Propagation Delay | 210 ns |
| Quiescent Current | 96μA |
| Response Time | 210 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 96μA |
| Voltage - Input Offset (Max) | 5mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | ±2.5mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 667mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
MAX996EUD+ Overview
In order to facilitate transportation, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .Output type CMOS, Open-Drain, Rail-to-Rail, TTL is used for this comparator.The part is shipped by Tube .The comparator has 14 terminals.The chip belongs to Comparators .Electronic comparator is capable of performing numerous tasks when powered by 2.7V voltage.In terms of type, this is a typical General Purpose comparator.Currently, it consists of only 4 elements.A total of 14 pins are included.Electronic comparator is recommended to mount the device using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .This comparator has 14 pins.In order to find a solution that meets your specific needs, search MAX996 for more pin-to-pin solutions.There is a quiescent current of 96μA in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.The nominal supply current of the device should be 320μA for normal use.A supply current exceeding 320μA may result in the comparator malfunctioning.The device can be operated with +-1.5/+-2.5/3/5V power supplies.
MAX996EUD+ Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 96μA
MAX996EUD+ Applications
There are a lot of Maxim Integrated MAX996EUD+ linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Wearable Devices
- Building automation
- Point of load regulators
- Motor drives
- Lithium ion battery monitoring
- Hand-Held Electronics
- General Purpose Low Voltage Applications
- DC/DC and AC/DC power supplies
- General-Purpose Portable Devices
