MC100E141FNR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Series | 100E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100E141 |
| Function | Universal |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 3 |
| Propagation Delay | 975 ps |
| Turn On Delay Time | 975 ps |
| Logic Function | Shift Register |
| Output Characteristics | OPEN-EMITTER |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| fmax-Min | 700 MHz |
| Count Direction | BIDIRECTIONAL |
| Max Frequency@Nom-Sup | 700000000Hz |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC100E141FNR2 Overview
28-LCC (J-Lead) package contains the device. 28 is the sum of the number of terminations in the chip. The Tape & Reel (TR) case contains it. Voltage rating of the part is 5V. A total of 1 elements are present on this part. Devices with 28 pins are available. It is recommended to mount by Surface Mount in order to get the best results. This component is mounted in the way of Surface Mount. There is a temperature range of 0°C~85°C. During operation, the voltage is within the range of 4.2V~5.7V. The 100E series is associated with this electrical component. If you use the 100E141 family, you can find parts that are similar. There are also the following additional considerations in this section: NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE. The minimum supply voltage (Vsup) for this part should not be less than 4.2V. A voltage of -4.5V can be delivered by it. This part requires a maximum supply voltage (Vsup) of 5.7V. There are 3 circuits in this device.
MC100E141FNR2 Features
With 28 pins
Mounted in Surface Mount type.
Based on 100E141 family
It supplies -4.5V power
MC100E141FNR2 Applications
There are a lot of ON Semiconductor MC100E141FNR2 Shift Registers applications.
- data manipulation
- Data Processors
- Remote control holding register
- Serial-to-parallel data conversion
- 8-bit data storage
- Serial-to-parallel data conversion
- Generate time delay toward digital circuits
- Pattern Recognizers
- ROM Chips
- store data in digital form
