MC100E143FNR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Weight | 1.182714g |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 900MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100E143 |
| Function | Universal |
| Number of Outputs | 9 |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Channels | 9 |
| Number of Bits | 9 |
| Propagation Delay | 1 ns |
| Turn On Delay Time | 1 ns |
| Logic Function | Shift Register |
| Halogen Free | Halogen Free |
| Logic Type | Shift Register |
| fmax-Min | 700 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 4.57mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100E143FNR2G Overview
This device can be found embedded within the package 28-LCC (J-Lead). 28 is the sum of the number of terminations in the chip. A Tape & Reel (TR) case holds it. The part operates at 5V voltage. 1 elements are present in this part. 28 pins are located on the device. The mounting method should be Surface Mount. Mounting of this component is indicated by Surface Mount. A temperature range of 0°C~85°C is used for the operating environment. Votage is supplied within 4.2V~5.7V. This electrical component belongs to the 100E series. Similar parts can be found using the 100E143 family. Additional aspects of this section include: NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V. There should be no less than 4.2V supply voltage (Vsup) for this part. It should not exceed 5.7V in terms of the supply voltage (Vsup). It has a total of 9 pins. 900MHz is the frequency of the device. It is equipped with 9 outputs.
MC100E143FNR2G Features
With 28 pins
Mounted in Surface Mount type.
Based on 100E143 family
MC100E143FNR2G Applications
There are a lot of ON Semiconductor MC100E143FNR2G Shift Registers applications.
- 7-segment display control
- Remote control holding register
- Dual-rank shift, hold, and bus applications
- Output expansion
- temporary data storage
- data manipulation
- Pattern Recognizers
- Generate time delay toward digital circuits
- Data Processors
- 8-bit data storage
