MC100EL56DWR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100EL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | Differential Digital Multiplexer |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer/Demultiplexers |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | ±4.2V~5.7V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EL56 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Circuit | 2 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Throw Configuration | DPST |
| Propagation Delay | 620 ps |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 4 |
| Max Input Voltage | 4.12V |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Number of Input Lines | 2 |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100EL56DWR2G Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 20-SOIC (0.295, 7.50mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.the multiplexers uses an analog IC Differential Digital Multiplexer.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of ±4.2V~5.7V.provides digital controlled switch's digital controlled switch'sThese multiplexers are members of the 100EL series, which provide extensive application potential.Among its basic features are 20 terminations.The part number for 100EL56 can be used to find its logic switch related parts as well.In this case, 5V is the voltage supplied to the multiplexer's system.Signal switch has 20 component pins.Conductors terminate at GULL WING in this design.The supply type of this multiplexer ic is Dual.With 20 pins, it is configured.The multiplexer ic is mounted in the direction of Surface Mount.Avoid unnecessary failures by keeping Vsup at 5.7V.The turn signal switch has 1 outputs designed for operation.Multiplexer/Demultiplexers is the classification for this the digital switch ic.This multiplexer is equipped with 4 inputs and 4 outputs.The switches package is packaged in a way which is consistent with TAPE AND REEL.As a voltage level input, the multiplexers have 2 lines.
MC100EL56DWR2G Features
Supplied in the 20-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Dual
2 input lines
MC100EL56DWR2G Applications
There are a lot of ON Semiconductor MC100EL56DWR2G Signal Switches / Multiplexers / Decoders applications.
- Electronics industry
- Enabling different rows of memory depending on address in memory chips
- Enabling block of memory depending on address in memory chips
- Steel plants
- Signal router
- To select different task for memory in microprocessor memory systems
- Audio transmission
- High-performance memory systems
- Encrypted communications system
- CPU memory location identification
